FAQ

Find the Frequently Asked Questions for POSBANK Products
If you need any technical supports that are not covered on FAQ or else where on our website, Please submit the [Technical Inquiry] to us.

QUESTION & ANSWER

When adding a printer, an error 'The job could not be completed' occurs.

- Control Panel → Computer Management → Services and Applications → Services → Select Printer Spooler, right-click and click 'Properties'.

- Please set after rebooting the POS.

Continuously ejects the printer paper.

- Delete the print request (waiting data) or recheck the installation environment for a cable delivery error.

I changed only the printer of the cable that was used, but printing is not possible.

- If the printer's manufacturer is different, the cable setting conditions may be different.

- Even if the serial and port are the same, if the pin map is different, the setting conditions are different and the connection is not possible.

POS Printer Troubleshooting - Print issue

POS Printer Symptom: Nothing is printed after change the roll paper. Corrective Procedure It may causes when the printer's roll paper is placed upside down.

  • Open the printer paper cover by pushing the open button.
  • Replace the roll paper on proper direction.
  • pull out the paper, then close the cover.

※ Note: When closing the cover, press the center of the cover so that the paper adheres to the roller.

POS Printer Troubleshooting - Printer Self Test

Self Test Procedure

  • Turn off the Printer
  • Turn on the Printer while pressing the feed button.
  • Printer will print out printer information and current setting values.
  • Turn off the printer again and turn it on. excute the POS program, and check the printer if it properly print the items.